PAN India — B2B Distribution Network

ARM9A4-P-W2

ARM9A4-P-W2

ARM9A4-P-W2

Home Automation

Dahua
Wireless Multi IO Transmitter

Online Support 24/7

Online Support 24/7

The Wireless Multi IO Transmitter allows for seamless connectivity with the Alarm Hub both through wireless radio frequency and a wired network. It serves as a bridge connecting the Alarm Hub to the existing wired detector and siren, so that triggered alarms are sent to the Alarm Hub from the wired detector, and the alarm hub then sends commands to the siren. This enables you to easily incorporate your old wired detectors and sirens into the new wireless alarm system, which significantly reduces the cost of modifications.

• Connection to Hub through RF or network communication.

• 16 alarm inputs, 4 relay outputs.

• 2 auxiliary power outputs with a maximum power of 24W for powering wired detectors and siren, and support overload and short circuit detection.

• POE and AC power two power supply options.

Port

Alarm Input

Supports local 16-channel alarm input,1 to 6 channels support pulse detection,and 1 to 16 channels support 0EOL/EOL/2EOL/3EOL
connected to a maximum of 500 m (1640.42 ft),(cable typed Rvv2*2.6,No strong electricity signal interference)

Alarm Output

Supports 4 local channels(Max 30 VDC, 3A)

Network Mode

Ethernet

Network Port

1 × RJ-45 10/100 Mbps Ethernet port;
PoE power supply

Storage Battery

Yes (12 V, 7 Ah.The backup battery is not included in the set)

Auxiliary Power Output

2 built-in auxiliary output, 14.5V, total 1 A (PoE), 2 A (Non PoE)

Function

Indicator Light

One indicator (indicator status)

Button

1 × switch button, 1 × reset button

Remote Update

Supports cloud update

Low Battery Detection

Yes

Tamper

Yes

Technical

Scenario

Indoors

Wireless

Carrier Frequency

433 MHz

Transmitter Power (EIRP)

limit 10 mW

Communication Mechanism

Two-way

Communication Distance

RF: Up to 1,200 m (3937.0 ft) in an open space

Encryption Mode

AES128

Frequency Hopping

Yes

General

Power Supply

100–240 VAC, 50/60 Hz. PoE (802.3at)

Power Supply Type

Type A

Standby Time

Static standby: Up to 30 hrs

Power Consumption

220 VAC quiescent current (40 mA Irms)
220 VAC max current@2Aload + charge (315 mA Irms)
POE quiescent current (125mA)
POE max current@0.75Aload + charge (612 mA)

Operating Temperature

–10 °C to +50 °C (+14 °F to +122 °F)

Operating Humidity

10%–90%

Product Dimensions

304 mm × 235 mm × 90.8 mm (11.97" × 9.25" × 3.57")

Net Weight

1.22 kg (2.69 lb)

Gross Weight

1.78 kg (3.92 lb)

Installation

Wall mount

Casing Material

PC + ABS

Appearance Color

White

Protection

IP30

Certifications

CE

Anti-corrosion Level

Basic Protection
*The products are designed for general use and are applicable even in areas with no specific requirements for anti-corrosion protection.

Storage Temperature

–10 °C to +55 °C (+14 °F to +131 °F)

Storage Humidity

10%–90%

Packaging Dimensions

369 mm × 140 mm × 280 mm (14.53" × 5.51" × 11.02") (L × W × H)

Downloads

Connect on WhatsApp View Portfolio

Send Inquiry Comments