MB100
Entrance Automation
The MORX MB100 is a high-performance automatic boom barrier
The MORX MB100 is a high-performance automatic boom barrier designed for secure and efficient vehicle access control.Powered by a 24V DC brushless motor, it offers fast operation, smooth start-stop functionality, overload protection, and seamless integration with RFID readers, loop detectors, radar sensors, and access control systems.Built with an IP54-rated durable design, it ensures reliable performance for parking management, toll plazas, residential, and commercial applications.
24V DC Brushless Motor drive, safe electrical, no risk of leakage
DC brushless mechanism, DC brushless motor, hull limit switch, operate stably, low sound, long lifetime
Operate speed at the fastest 1.25, the speed adjustment is available, soft start and soft stop function,
high efficiency pass
Adjustable (3-6 meters) to suit varied site requirements
With reverse, auto-close, & auto-intelligent check functions are available
Telescopic Boom, Fixed Boom
Weather-resistant aluminum boom with reflective strips (compliance with traffic safety standards)
External Interface suitable device, loop detector, radar sensor, Photocell, Access Controller with UHF
Readers & RS485 is optional
Manual Lift and Lower: Equipped with a motorized hand wheel, the lever can be manually raised and
lowered during a power outage
Ingenious Design: Utilises a sinusoidal mechanism and maintenance-free bearings to minimize wear &
tear on components
Safe Use: The lever will not rapidly rise or fall
- Parking
- Weighbridge
| Input voltage | 24V |
| Rated/peak current | 8A/30A |
| Compatible motor | DC brushless motor |
| The compatible motor power | ≤200W |
| Operational Type | Electromechanical |
| The human-machine interface features | 3-digit LED and 5-digit buttons |
| Communication interfaces | RS232/RS485 |
| Hardware protection | Overcurrent protection, overvoltage protection and short-circuit protection |
| Input signals | Open the gate, close the gate, stop, ground sensing, anti-crushing |
| Output signal | The output signal fully open and fully closed |
| In case of power failure | Open the switch and connect an external 12V 1AH battery |
| The temperature rise | ≤15°C |
| The size of the controller | 176.6(H)*103(W)*34(D)mm |
| Working environment temperature | -20°C~55°C |
| The working environment | 90%, no condensation |
| Overall Dimensions | 310×245×990mm |
| IP Class | IP54 |
